MSI K8NNeo4 Platinum Series User Manual page 63

M S-7125 ATX M ainboard
Power Button Function
This feature sets the function of the power button. Settings are:
[Power Off]
[Suspend]
Restore On AC Power Loss
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Available settings are:
[Off]
[On]
[Last State]
Wake-Up Event Activity
Press <Enter> and the following sub-menu appears.
Resume S3 by PS2/Keyboard, Resume S3 by PS2/M ouse
These fields allow the activity of the PS2 (keyboard and mouse) to wake up the
system from S3 sleep state. Settings: [Enabled], [Disabled].
Resume By PCI Device PM E#
W hen set to [Enabled], the feature allows your system to be awakened from the
power saving modes through any event on PME (Power Management Event).
Settings: [Enabled], [Disabled].
Resume By RTC Alarm
The field is used to enable or disable the feature of booting up the system on a
scheduled time/date. Settings: [Enabled], [Disabled].
Date
The field specifies the date for Resume By RTC Alarm. Settings: [0]~[31].
HH:MM:SS
The field specifies the time for Resume By RTC Alarm. Format is <hour>
<minute><second>.
3-20
The power button functions as normal power off button.
W hen you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.
Always leaves the computer in the power off state.
Always leaves the computer in the power on state.
Restores the system to the status before power failure
or interrupt occurred.