Technical Support; Safety Instructions - MSI K8NNeo4 Platinum Series User Manual

Technical Support

If a problem arises with your system and no solution can be obtained from the user's
manual, please contact your place of purchase or local distributor. Alternatively,
please try the following help resources for further guidance.
† Visit the MSI homepage & FAQ site for technical guide, BIOS updates, driver
updates, and other information: http://www.msi.com.tw & http://www.msi.
com.tw/program/service/faq/faq/esc_faq_list.php
† Contact our technical staff at: support@msi.com.tw

Safety Instructions

1. Always read the safety instructions carefully.
2. Keep this User's Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the equip-
ment from overheating. Do not cover the openings.
6. Make sure the voltage of the power source and adjust properly 110/220V be-
fore connecting the equipment to the power inlet.
7. Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
8. Always Unplug the Power Cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage or cause electrical
shock.
11. If any of the following situations arises, get the equipment checked by a service
personnel:
†
The power cord or plug is damaged.
†
Liquid has penetrated into the equipment.
†
The equipment has been exposed to moisture.
†
The equipment has not work well or you can not get it work according to
User's Manual.
†
The equipment has dropped and damaged.
†
The equipment has obvious sign of breakage.
12. Do not leave this equipment in an environment unconditioned, storage
temperature above 60
CAUT ION:
Replac e only with the same or equivalent type recommended by the
manufacturer.
0 0
C (140 F), it may damage the equipment.
Danger of explos ion i f battery is inc orrec tly replac ed.
iv