Export Regulation; Caution On Transport - Konica Minolta GMPC02 User Manual

Gas Camera / GMPC02
∙
Plug in the USB cable with the correct orientation. Otherwise, it might damage the camera.
∙
Do not disconnect the USB cable when the camera and PC are connected via USB for data transfer. Doing
so may corrupt data.
∙
Turn off the camera before inserting or removing the SD card. Removing or inserting the SD card while
the camera is running may result in data corruption.
∙
Be sure to change the initial Wi-Fi password. Keep the changed password with caution.
∙
GPS signals may not be received if you are inside a building or there are obstacles in the surrounding
area.
If you need to receive GPS signals, move to an open outdoor area.
If you move to an open outdoor area and still cannot receive the GPS signals after 10 minutes or more,
reboot the camera.
∙
This camera may make a motor noise for a while after turning off the power, but this does not affect
product quality.

2.3 Export Regulation

The products comprising this camera contain goods, technology, or software that are subject to the
Foreign Exchange and Foreign Trade Act of Japan and its related laws and regulations, and the Export
Administration Regulations (EAR) of the U.S. Department of Commerce. Comply with these laws and
regulations when exporting the products comprising this camera or providing them to non-residents.
The use of this camera in the design, development, production and/or use of nuclear, chemical or
biological weapons or missiles is strongly prohibited.

2.4 Caution on Transport

THIS PRODUCT IS A PRECISION INSTRUMENT. WHEN YOU NEED TO TRANSPORT THIS PRODUCT TO ANY
LOCATION, USE PACKING MATERIALS SPECIFIED BY KONICA MINOLTA IN ORDER TO MINIMIZE
VIBRATIONS AND SHOCKS. CONTACT YOUR DEALER FOR FURTHER INFORMATION REGARDING OUR
SPECIFIED PACKING MATERIALS.
11
Safety Guide