NOTE:
1. For each Ethernet-
enabled device added
onto the network, just
repeat the above
procedures.
2. If connecting to a
non-PC based device,
no further software
installation is needed.
4. Enter your User Name and Organization; then, click
Next.
Click Install in the following window, and the program
5.
starts to install the software to the system. The
progress indicator can show you the installation status.
When the installation is completed, click Finish.
6.
Click Yes to restart your computer when prompted.
7.
8.
After rebooting, the HomePlug
Converter Utility icon will appear
on your Windows desktop.
12