Dynaudio Core Series User Manual page 7

Hide thumbs Also See for Core Series:

Table of Contents

Core 7, 47, 59 monitors and Core

Sub

The transducers of your Dynaudio Core monitor will achieve a better sound quality after a break-in period.

Especially after the first hours of use, you may notice a significant increase in sound quality, and further subtle

improvements in subsequent hours of use.

Amplifier

The Core monitor range features integrated Class-D amplifiers with analogue and digital inputs. All connections

and settings are available on the back plate of the amplifier. Please do not remove the amplifier yourself. In case of

service, contact your Dynaudio reseller.

Figure 1: Core controls

1. Power mode: Power-saving auto-standby switch

2. Bass extension: sets a Linkwitz-Riley HPF at 80 Hz

3. Digital channel: selects the left or right channel of the AES digital input signal

4. Sound balance: switches between three tilt filter settings

5. Position switch 1: position filters

Core 7, 47, 59 monitors and Core Sub

Table of Contents

Core 7 Core 47 Core 59 Core sub