Rear Panel
The back panel provides the following connectors:
Mouse
Keyboard
Hardware Setup
This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as
how to setup the jumpers on the mainboard. It also provides the instructions on connecting the
peripheral devices, such as the mouse, keyboard, etc. While doing the installation, be careful in
holding the components and follow the installation procedures.
Central Processing Unit: CPU
The mainboard supports Intel Pentium 4 Willamette / Northwood / Prescott / Prescott Celeron
processor (FSB 400MHz/533MHz) in the 478 pin package. The mainboard uses a CPU socket
called PGA478 for easy CPU installation. When you are installing the CPU, make sure the CPU
has a heat sink and a cooling fan attached on the top to prevent overheating. If you do not find
the heat sink and cooling fan, contact your dealer to purchase and install them before turning on
the computer. (For the latest information about CPU, please visit
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support.php )
Example of CPU Core Speed Derivation Procedure
If
CPU Clock
Core/Bus ratio
then
CPU core speed
Parallel Port
COM port
=
=
=
=
=
USB Ports
VGA port
133MHz
23
Host Clock x Core/Bus ratio
133MHz x 23
3.06 GHz
4
(Optional)
LAN
USB Ports
Line In
Line Out
Mic In