Front Panel Connectors: Jfp1 & Jfp2; Front Panel Audio Connector: Jaud1; Front Usb Connector: Jusb1 - MSI 845PE-V2 Series Instruction Manual

Front Panel Connectors: JFP1 & JFP2
The mainboard provides two front panel connectors for electrical
connection to the front panel switches and LEDs. JFP1 is compliant
with Intel Front Panel I/O Connectivity Design Guide.

Front Panel Audio Connector: JAUD1

The JAUD1 front panel audio connector allows you to connect to the
front panel audio and is compliant with Intel ® Front Panel I/O
Connectivity Design Guide.
MSI Reminds You...
If you do not want to connect to the front audio header, pins 5 & 6, 9 & 10 have to be jumpered in order
to have signal output directed to the rear audio ports. Otherwise, the Line-Out connector on the back
panel will not function.

Front USB Connector: JUSB1

The mainboard provides one standard USB 2.0 pin header JUSB1. USB
2.0 technology increases data transfer rate up to a maximum throughput
of 480Mbps, which is 40 times faster than USB 1.1, and is ideal for
connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3 players,
printers, modems and the like.
MSI Reminds You...
Please note that the pins of VCC & GND must be connected correctly, or it may cause some damage
Keyboard/Mouse Voltage Jumper: JPUSB1
This jumper is used for setting the voltage of the keyboard/mouse. The default setting is VCC5 (1~2).
9 1
10
2
VCC5 5V Standby
9