Chapter 3
Set Wake Up Events
Press <Enter> to enter the sub-menu and the following screen appears:
Resume On Ring/LAN
When setting to Enabled, the features allow your system to be awakened
from the power saving modes through an incoming call from the modem
or any incoming signal received via the LAN. Settings: Enabled and
Disabled.
Note: You need to install a modem/LAN card supporting power on
function for Resume On Ring/LAN function.
Resume On PME#
When setting to Enabled, the feature allows your system to be awakened
from the power saving modes through any event on PME (Power Man-
agement Event). Settings: Enabled and Disabled.
Resume On RTC Alarm
This is used to enable or disable the feature of booting up the system on
a scheduled time/date from the soft off (S5) state. Settings: Enabled and
Disabled.
RTC Alarm Date/Hour/Minute/Second
If Resume On RTC Alarm is set to Enabled, the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in these
fields. Available settings for each item are:
3-16