MSI 845E Neo-V User Manual page 63

MS-6566E ATX Mainboard
ECP mode only. Choosing [Bi-Dir] will allow the onboard parallel port to
support both the ECP and EPP modes simultaneously.
EPP Version
The item selects the EPP version used by the parallel port if the port is set to
[EPP] mode. Settings: [1.7], [1.9].
Parallel Port IRQ
When parallel port is set to [Auto], the item shows [Auto] indicating that BIOS
determines the IRQ for the parallel port automatically.
Parallel Port DMA Channel
This feature needs to be configured only when Parallel Port Mode is set
to the [ECP] mode. When parallel port is set to [Auto], the field will show
[Auto] indicating that BIOS automatically determines the DMA channel for the
parallel port.
Onboard Midi Port
This setting disables or assigns an address for the onboard midi port.
Midi IRQ Select
This setting specifies an IRQ for the onboard midi port.
3-22