Front Panel 4 - Panasonic AK-MSU1000G Operating Instructions Manual

Front panel 4

1
1 [MONITOR R, G, B, SEQ, ENC]
(monitor switching) buttons
2 [HEAD] button
3 [ECC] button
4 [ND] indicator
5 [1] to [5] (ND filter selection)
buttons
6 [CC] indicator
7 [A] to [E] (CC filter selection)
buttons
2 3 4 6
Use these buttons to switch the CCU's PM output signal according to MSU operations.
Use this button to enable filter control on the camera side.
When this button is lit, [ECC] > [TEMP SW] in the [PAINT] menu can be enabled or disabled.
In addition, when this button is lit, the [A] and [B] (CC filter selection) buttons can be used for
changing the [ECC] > [TEMP] setting in the [PAINT] menu.
[A] button: DOWN
[B] button: UP
This indicator indicates the ND filter setting status.
Use these buttons to select the ND filter.
When [HEAD] button off
Changes the ND filter setting.
[HEAD]
When button lit
Only displays the ND filter position. (Switching is not possible.)
This indicator indicates the CC filter setting status.
Use these buttons to select the CC filter.
In addition, when the [ECC] button is lit, the [A] and [B] (CC filter selection) buttons can be
used for changing the [ECC] > [TEMP] setting in the [PAINT] menu.
[A] button: DOWN
[B] button: UP
- 26 -
Parts and their functions
7 5