Table of Contents
Advertisement
Front panel 2
1
2
3
8
9
10
1
[FLARE OFF] button
2
[B.GAMMA ON] button
3
[GAMMA OFF] button
4
[KNEE OFF] button
5
[W.CLIP OFF] button
6
[MATRIX ON] button
7
[DISP] button
8
[HD.DTL OFF] button
9
[SD.DTL OFF] button
10
[SKIN DTL ON] button
11
[DRS ON] button
12
[ASSIGN 1], [ASSIGN 2],
[ASSIGN 3] button
13
[VIDEO] button
14
[CHARACTER ON] button
4
5
6
11
12
Use this button to disable or enable the flare correction.
Use this button to enable or disable the black gamma correction.
Use this button to disable or enable the gamma correction.
Use this button to disable or enable the knee function.
Use this button to disable or enable the white clip function.
Use this button to enable the function to correct saturation and color phase according to the
gain setting of each color component in matrix memory.
Use this button to display the status information of the connected CCU and camera on the
unit's <HD SDI OUT> connector.
Use this button to disable or enable the HD detail effect.
Use this button to disable or enable the SD detail effect.
Use this button to apply coring to the detail enhancement of the skin tone areas in the video
output to soften or increase the enhancement of skin tone details.
Use this button to enable or disable the dynamic range stretcher.
Use these buttons to enable or disable the menu functions assigned to each button.
Use this button to switch the LCD panel display. The display will switch between menu display
and display of the input video of the unit's <HD SDI IN> connector.
Use this button to enable or disable status screen display on the CCU picture monitor (PM).
7
13
14
- 24 -
Parts and their functions
Advertisement
Chapters
Table of Contents
