Chart Setup; Limit Search - Lowrance X51 Installation And Operation Instructions Manual

NOTE:
If you turn on your unit before attaching a transducer, it may enter
a demo mode. The words "demo mode" flash on the bottom of the
screen and a sonar chart plays much like the simulator. Unlike the
simulator, the demo mode is for demonstration only, and will auto-
matically stop as soon as you turn on the unit with a transducer at-
tached. The simulator will continue to function normally.

CHART SETUP

The Chart Setup menu lets you further customize the display. The size
of the digital numbers for the depth, temperature, speed and distance
log can be customized from this menu. The depth scales shown on the
right side of the screen can be modified, and the Fish Reveal modes can
be turned on or off.
To enter the Chart Setup menu sequence, press
menu appears. Press
C S
HART ETUP
menu keys to cycle through the chart setup menus.

LIMIT SEARCH

The Limit Search command helps you maintain maximum chart detail
when you are moving fast in deep water (about 200 feet.) When turned
on, Limit Search prevents the digital sonar from over-riding the sonar
chart's depth range setting.
Limit Search does this by preventing the digital sonar from slowing
down the ping speed as it automatically searches for and tracks the bot-
tom. The default setting is off, and this should fit most freshwater
fishing situations.
UP ARROW
Chart Setup menu.
49
MENU DOWN
and then you can use the
until the