Display - Opening Screen; Chart Scroll (Stopping And Starting) - Lowrance X51 Installation And Operation Instructions Manual

All you have to do to leave one menu and enter another is press
peatedly. If you ever get lost in the menus, simply press the
clears the menus from the screen.
Menus change depending on the mode the unit is in. Messages may appear
in menu boxes or new menus can appear, depending on previous selections.
DISPLAY – Opening Screen
The lights flash for about 10 seconds when the unit is turned on. The
backlight menu first appears on the screen. To turn the lights on, press
. If you don't press a key, the menu will disappear after a few
UP ARROW
seconds. If you don't want to wait, press
the screen.
When the sonar unit is first turned on and the backlight menu disap-
pears, the display screen shows the Full Chart Page, or mode. The Fish
I.D. feature is off. The depth range shows on the depth scale on the
right side of the screen. On the screen below, the range is from 0 to 60
feet and the bottom depth is 33.2 feet, shown by the digital sonar.
Digital depth
School of bait fish
Thermocline
Bottom signal
Transducer frequency
(X58DF only)
Speed

CHART SCROLL (stopping and starting)

In normal operation, the sonar chart will scroll from right to left across
the screen. You can stop the chart from scrolling across the screen. This
is useful when you want to "freeze" the picture to study it more closely.
To stop or start the chart, press
Use the arrow keys to select or highlight the desired setting, then press
to clear the menu.
PWR
Opening screen, Full Chart page, or mode.
to clear the menus from
PWR
until the
MENU
25
MENU
key. This
PWR
Surface clutter
Fish arches
near bait fish
Depth scale

Grayline
Depth range
at bottom of
depth scale
menu appears.
C
HART
re-