Roland FS-1-WL Connection Manual page 7

Operating GS-1 from FS-1-WL
When FS-1-WL and GS-1 set to their default values,
the FS-1-WL controls correspond to the following
parameters on GS-1.
* To operate GS-1 with FS-1-WL, CC# of FS-1-WL and CC# of GS-1
must match.
FS-1-WL
(default setting)
EXP: CC#11
(N/A)
PEDAL L: PEDAL C:
CC#80 CC#81
CTL1,2
In default settings, CTL1 (CC#85) and CTL2 (CC#86) of FS-1-WL are
not subject to GS-1 operation.
PEDAL R: CC#82
GS-1 Editor default setting screen
7