Types Of Construction On The Rating Plate; Transport - Siemens SIMOTICS SD Operating Instructions Manual

Preparing for use
4.5 Transport and storage
• Never remain under or in the immediate vicinity of the machine when it is lifted.
Note
When lifting the machines for transport, only lift them in a position that corresponds to their
basic construction type.
4.5.1.1

Types of construction on the rating plate

The type of construction of the machine is stated on the rating plate.
4.5.2

Transport

If any transport locks are in place, remove them before commissioning. Store the transport locks
or disable them. Use the transport locks when transporting the motors again or reactivate the
transport locks.
The machines are packed in different ways depending on how they are transported and
their size. If not otherwise contractually agreed, the packaging corresponds to the packing
guidelines according to ISPM (International Standards for Phytosanitary Measures).
Comply with the graphic symbols provided on the packaging. Their meaning is as follows:
This
way up
36
WARNING
Danger to life as a result of a machine falling
If the lifting gear or load handling attachments were to fail, the machine could fall. This can
result in death, serious injury or material damage.
• In order to gain easy and safe access to the underside of the machine, place it in a secure
and raised position.
Fragile
goods
Protect Protect
against against
moisture heat
Center of Hand hooks
gravity forbidden
1LE5, 1PC4 shaft heights 280 ... 355
Operating Instructions, 11/2022, A5E41454666A
Attach
here