Advance Menu_ Remote; Advance Menu_ System; Advance Menu_ Network; Advance Menu_ Backup - Lorex L224 Series Instruction Manual

4.12 ADVANCE MENU ___NETWORK
4.12 ADVANCE MENU ___NETWORK
Move the cursor to "NETWORK" and press "ENTER". The screen will show the
following options.
NETWORK TYPE
DNS
PORT
1) NETWORK TYPE (STATIC):
Select NETWORK TYPE, press "＋" or "－" button to set the network type as
STATIC, and then press "ENTER" to go to the submenu of the network. In
the submenu of network type, use "＋" or "－" button to set all the information
needed in the DVR. See the illustration below.
IP
GATEWAY
NETMASK
2) NETWORK TYPE (DHCP):
The DHCP function needs to be supported by a router or a cable modem
network with DHCP services. For detailed DHCP settings, please refer to the
AP (Licensed Software AP) setup at P37 and P38.
3) NETWORK TYPE (PPPOE):
This PPPOE function needs to have one "username" and one "password"
subscribed from one ISP supplier.
For detailed PPPOE settings, please refer to the AP (Licensed Software AP)
setup at P37 and P38.
NOTE:
DHCP and PPPOE network types need to apply DDNS services to get "Hostname" to
correspond to the dynamic IP address. For detailed DDNS settings, please refer to
P.38.
NETWORK
NETWORK
STATIC
61. 66. 138. 53
0 0 8 0
STATIC STATIC
60. 121. 46. 236
60. 121. 46. 226
255. 255. 255. 254
23