Lorex L224 Series Instruction Manual page 25

4.8 ADVANCED MENU ___DISPLAY
4.8 ADVANCED MENU ___DISPLAY
Move the cursor to "DISPLAY" and press "ENTER". The screen will show the
following options.
TITLE DISPLAY
DATE DISPLAY
HDD INFO
LOSS SCREEN
PLAYBACK INFO
DWELL DURATION (SEC)
DE-INTERLACE
MONITOR OUT
OSD
WATERMARK
1) TITLE DISPLAY:
Turn the channel title display on / off.
2) DATE DISPLAY:
Turn the date display on / off.
3) HDD INFO:
Turn the information display of internal HDD on / off.
4) LOSS SCREEN:
Set the color of the video loss screen (Blue or Black)
5) PLAYBACK INFO:
Set the position where playback information will be indicated
(center or normal (on the button of the left-hand side of the screen)).
6) DWELL DURATION (SEC):
Set the duration time of each channel for CALL MONITOR (2, 4, 8, 16 secs.)
7) DE-INTERLACE:
Set the "DE-INTERLACE" function on / off.
8) MONITOR OUT:
Select "MAIN" when the video output device is CRT monitor.
Select "VGA" when the video output device is LCD monitor.
Note: If the connected video output device is LCD monitor, but the setting here is "MAIN", motion
detection area setting will be disabled.
9) OSD:
Set the customized OSD color.
10) WATERMARK:
In the playback mode of the software AP, users could proof the authenticity of the BACKUP
VIDEO. If the BACKUP VIDEO had been modified, the video image will turn to
the playback will be paused.
Please refer to P. 36 for detailed instructions.
Note: This function is always on and non
Note: This function is always on and non
DISPLAY DISPLAY
ON
ON
ON
BLUE
NORMAL
2
ON
MAIN
SETUP
ON
- switchable .
- switchable .
19
light red and light red