System Settings - Weil-McLain Eco Tec 2 Series Manual

ECO ® Tec series 2 gas-fired water boiler – boiler manual

System Settings

Boiler Model, Altitude and Fuel Type are
critical settings.
result in severe personal injury, death or substantial
property damage.
Figure 96
System Settings menu options
CONTRACTOR MENU
BOILER SYSTEM
DIAGNOSTICS
SETTINGS SETTINGS
MODBUS
SETTINGS
PRIORITIES
120°F
1ST
COMBI-DHW
PREHEAT ECON
ECO BOOST ON
180°F
2ND
FIN BASE
130°F
160°F
AUX PUMP/OUT –
3RD
RADFLOOR
LOCAL DAMPER
90°F
106
Failure to set correctly could
MENU Item
INPUTS
SERVICE INFO
PRIORITIES
INPUTS
BLR PUMP
INPUT/OUTPUT 1
INPUT/OUTPUT 4
BLR PUMP
INPUT/OUTPUT 2
BLR PUMP
INPUT/OUTPUT 3
1. Access contractor menus by pressing and holding the WM
Logo for 7 seconds from the home screen.
2. See the following pages for explanations of control setting
options.
DESCRIPTION
• Press on any of the Input squares to navigate to the Input
assignment screen. Assign priorities to inputs and the
source of Input 2.
• Custom name will appear above Input/output # when a
name is entered.
• See page 114 (Configure Inputs and Outputs).
• Press on any of the Priorities buttons to navigate to that
priority settings.
• Each box displays from left to right: the priority number,
system type, Max Target Temp on top of Min Target Temp
(when used), and populates BLR Pump and/or SYS PUMP
when selected to run these during that priority. The color
of the box corresponds to the color of the Input/output #.
• See page 107 (Boiler Priority menus).
Part number 550-100-270/0122