Bluetooth - Weil-McLain Eco Tec 2 Series Manual

ECO ® Tec series 2 gas-fired water boiler – boiler manual
HOMEOWNER NAVIGATION menus
Boiler Model, Altitude and Fuel Type are
critical settings.
result in severe personal injury, death or substantial
property damage.
ECO Tec
Figure 93 HOMEOWNER NAVIGATION menu (continued)
MENU
DATE/TIME BACKLIGHT CLEAN
HOT WATER MAINTENANCE
2/28/20
9:45AM
WIRELESS STATUS

BLUETOOTH

ON
FCC: 2AC7Z-ESP32WROOM32E
IC: 21098-ESPWROOM32E
2/28/20
9:45AM
Part number 550-100-270/0122
Failure to set correctly could
MENU Item
BLUETOOTH
SOFTWARE BLUETOOTH
SETTINGS
BLUETOOTH STATUS
Assembled From
tested components
Complete system
not tested
HOT WATER
MAINTENANCE
SETTINGS
1. Access contractor menus by pressing and holding the WM
Logo for 7 seconds from the home screen.
2. See the following pages for explanations of control setting
options.
PURPOSE
• Allows the user to turn Bluetooth ON or OFF. Swipe right
from HOME and press BLUETOOTH to reach FCC and
IC information.
• Bluetooth allows the user to connect remotely to the WM
ProTool app, where the user can wirelessly communicate
to the boiler. The app functions include, but are not limited
to, allowing the user to install the latest software for their
boiler control, display and Bluetooth radio, gives quick
access to boiler information, and provides contact informa-
tion to WM Technical Services.
FCC: Wireless device unique identifier registered
with the U.S. Federal Communications Commission.
IC: Wireless certification approval number unique to
all devices, required for Canada.
• This device complies with Part 15 of the FCC Rules. Op-
eration is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
• Allows the user to edit the Hot Water Temp of the Combi
demand, as well as enable or disable PREHEAT mode or
ECO BOOST.
• Allows the user to view contractor and maintenance
information, as well as reset the maintenance reminder
when present.
• Allows the user to edit temperature units, screen time out,
daylight savings time and sound effect of presses.
(continued)
103