L104 Series - Front - Lorex L104161 Instruction Manual

L104 Series - Front

1
1. USB - One USB 2.0 port is provided to connect the DVR to a PC using the provided USB (Male to
Male) Cable and the included PC Viewer Software. Video can be archived on the PC in either *.MYS
or *.AVI format.
2. UP NAVIGATION / CH1 DISPLAY - Press the key to view Channel 1 during Live View Mode. Use
this key in Menu Mode to Navigate UP and change settings.
3. DOWN NAVIGATION / CH2 DISPLAY - Press the key to view Channel 2 during Live View Mode.
Use this key in Menu Mode to Navigate DOWN and change settings.
4. RIGHT NAVIGATION / CH3 DISPLAY - Press the key to view Channel 3 during Live View Mode.
Use this key in Menu Mode to Navigate RIGHT and change settings.
5. LEFT NAVIGATION / CH4 DISPLAY - Press the key to view Channel 4 during Live View Mode. Use
this key in Menu Mode to Navigate LEFT and change settings.
6. MENU - Press the MENU key to enter or exit the DVR Setup Mode.
7. IR RECEIVER - Receives the signal from the Remote Control
8. PLAY / PAUSE - Press the key to start the playback of Video. Press the key during Video Playback
to Pause.
9. REVERSE / MUTE - Press the key to during video playback to reverse the video (2x, 4x or 8x
speed). Press the key during Live View to MUTE the sound (if using a Sound Input device).
10. FAST FORWARD / SEQUENCE MODE - Press the key to during video playback to Fast Forward
the video (2x, 4x or 8x). Press the key during Live View to Sequence through all Channels.
11. RECORD / PAUSE - Press the key during video playback to freeze the video on the screen. Press
the key during Live Video viewing to start manual recording.
12. POWER LED / HDD ACTIVITY LED - The RED POWER LED indicates that the unit is ON. The
GREEN HDD ACTIVITY LED blinks when video is being recorded to the Hard Drive.
2 4
3
8 9 10
L104 Series - Front
6 7
5
11 12
9