Lorex L16481 Install Manual

STEP 1
SETTING UP YOUR DIGTIAL VIDEO RECORDER (DVR)
* This set-up guide assumes you are connecting the DVR to a Lorex Observation System. Refer to your Observation System manual to learn how to set-up the observation monitor.
Consult your DVR's owners manual for alternative DVR connection options.
Pac ka ge C on te nts
1 - Digital Video Recorder (4 Channel) 8 - RCA/ BNC Connectors
1 - 80 GB Hard Disk Drive 2 - Keys (for hard drive cartridge plus screws)
5 - RCA Cables
1 - Remote Control
1 - Owner's Manual
1 - Power Adapter
1 - Quick Installation Guide
3
Connect the supplied
video cable from CH1
video input of the
DVR to the CH1 video
output of the monitor.
(Repeat this Step for Ch2,
Ch3, Ch4)
BACK OF THE DVR
6
Turn the Master power
switch ON
(located at the
back of the DVR)
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved.
L164-81
Page 1 Rev. 3
1
Connect the supplied
RCA/BNC connector
to the monitor's CH1,
CH2, CH3, CH4 Video
Output
4
Connect supplied
video cable from the
video OUT of the DVR
to the video VCR IN of
the monitor
BACK OF A LOREX MONITOR
7
Press the power
button to turn
ON the DVR
BACK OF THE DVR
2
BACK OF A LOREX MONITOR
Cameras
5
DIN
INPUT
RCA
INPUT
BNC
OUTPUT
Monitor-
Back Jack Panel
RCA
VIDEO
OUT
DVR- Back Jack Panel
BNC VIDEO INPUT
8
FRONT OF THE DVR
BUS IN ESS & HOM E SECURI TY
Connect the supplied
RCA/BNC connector to
the DVR's CH1, CH2,
CH3, CH4 Video
Output
BACK OF THE DVR
Connect the DVR to
an electrical outlet
BACK OF THE DVR
Press the VCR button
to enable DVR
function
(located at the
front of the Lorex moni-
tor)
FRONT OF A LOREX MONITOR
www. lo rex c c tv .c o m