Starting Warm Engine - Echo Shindaiwa DH232 Operator's Manual

OPERATION
5. Choke
After engine fires (or 2-3 pulls),
move choke (B) to the RUN (
(open) position. Restart engine if
necessary and allow unit to
warm up at idle for several
minutes.
Note: If engine does not start
with choke in "RUN"
position after 2-3 pulls,
repeat instructions 2 - 5.
The blades must not move at idle, otherwise serious personal
injury may result. Periodic carburetor adjustment may be
necessary to assure blades do not move at idle. If blades move,
readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your dealer.
6. Throttle Trigger
After engine warm-up, grip the
throttle handle and support
handle. Depress the throttle
trigger lockout (E), and gradually
depress throttle trigger (F) to
increase engine RPM to operating
speed.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the
choke.
The blades must not move at idle, otherwise serious personal
injury may result. Periodic carburetor adjustment may be
necessary to assure blades do not move at idle. If blades move,
readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your dealer.
22
)
© 07/22 ECHO Incorporated
DH232
C B
E
F
X7712240202