Stopping Engine - Echo Shindaiwa DH232 Operator's Manual

DH232
1. Stop Switch
Move stop switch (A) away from
the STOP position.
2. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
3. Recoil Starter
Place the unit on a flat, clear
area. Grip the support handle
securely with one hand, and pull
the recoil starter handle (D) until
engine starts.
Note: If engine does not start
after 2-3 pulls, use Cold
Start Procedure.

Stopping Engine

1. Throttle
Release throttle trigger (F) and
allow engine to return to idle
before shutting off engine.
X7712240202
© 07/22 ECHO Incorporated
OPERATION
A
C
D
F
23