Starting Warm Engine - Echo 02999999 Operator's Manual

Grass trimmer/brush cutter
Hide thumbs Also See for 02999999:
Table of Contents

Advertisement

4.
Start - Pull Rope.
Lay the trimmer on a flat, clear area and pull the recoil starter handle
(D) until engine fires.
5.
Open Choke - Run.
Move the choke lever to the OPEN - RUN position. Restart engine
if necessary and allow to warm up running at idle for several
minutes.

STARTING WARM ENGINE

The starting procedure is the same as Cold Start except DO NOT close
the choke.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
WARNING
When engine starts, the cutting attachment may rotate even with
the throttle trigger in idle (released) position.
1.
Stop Switch - Start/Run. Move stop switch button (A) away from
the STOP position.
2.
Primer - Pump Bulb. Pump primer bulb (C) until fuel is visible and
flows freely in the clear fuel tank return line. Pump bulb an addi-
tional 4 or 5 times.
3.
Start - Pull Rope. Lay the trimmer on a flat, clear area and pull
the recoil starter handle (D) until the engine fires.
G
RASS
DANGER
T
/B
RIMMER
RUSH
O
'
PERATOR
S
D
A
C
D
C
UTTER
27
M
ANUAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srm-23102001001Srm-231u

Table of Contents