Table of Contents
Advertisement
MAINTENANCE
Sharpening
Level 2.
If a power grinder is used DO NOT allow blade to over heat.
1.
Move stop switch to STOP position.
2.
Disconnect spark plug wire.
3.
Remove blade guard.
4.
Slide blades to allow file
clearance using slots (A) on
bottom of blade. Do not pry
against cutting edges.
5.
File each edge carefully. Follow
the original shape of the blade.
6.
Install blade guard.
Use new lock nuts each time blade guard is installed. See dealer for
correct nuts.
7.
Lubricate blades (see "Lubrication").
8.
Connect spark plug wire.
Adjustment
Level 2.
Locking ability of hedge trimmer blade lock nuts will diminish each
time they are removed. Replace if turning resistance is not felt when
installing lock nuts.
1.
Tighten blade screws securely.
36
A
X7712240202
© 07/22 ECHO Incorporated
DH232
Advertisement
Table of Contents
