Chapter 4: Software Installation And Configuration For Windows 98, Me, And 2000; Overview; Instructions For Windows 98, Me, And 2000 - Linksys WMP11 ver. 2.7 User Manual

Chapter 4: Software Installation
and Configuration for Windows
98, Me, and 2000

Overview

The Wireless PCI Card Setup Wizard will guide you through the installation
procedure for Windows 98, Me, and 2000. The Setup Wizard will install the
WLAN Monitor and Device Driver, as well as configure the Card.
Important for Windows XP users: Do NOT run the Wireless PCI
Card Setup Wizard. Proceed directly to "Chapter 5: Hardware
Installation."
Important for Windows 98, Me, and 2000 users: You must run the
Setup Wizard to install the software before installing the hardware.
Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 4-1 should appear. If it does not,
click the Start button and choose Run. In the field that appears, enter
D:\setup.exe (where "D" is the letter of your CD-ROM drive).
6
Instant Wireless
Figure 4-1
Wireless PCI Card
™ Series
• Install - Click the Install button to begin the software installation process.
• User Guide - Click the User Guide button to open the PDF file of this User
Guide.
• LINKSYS Web - Click the LINKSYS Web button to access the Linksys
website through an active Internet connection.
• Exit - Click the Exit button to exit the Setup Wizard.

Instructions for Windows 98, Me, and 2000

1. To install the Card, click the Install button on the Welcome screen.
2. After reading the Warranty Policy, click the Next button if you agree, or click
the Cancel button to end the installation.
Figure 4-2
7