Chapter 5: Installation And Configuration For Windows 98, Me, And 2000; Overview; Software Installation For Windows 98, Me, And 2000 - Linksys Instant Wireless Series User Manual

Chapter 5: Installation and
Configuration for Windows 98, Me,
and 2000
Important for Windows XP users: Go to "Chapter 4: Installation
and Configuration for Windows XP."

Overview

The Dual-Band Wireless A+G PCI Adapter Setup Wizard will guide you
through the installation and configuration procedure for Windows 98, Me, and
2000. Then you will install the Adapter in your computer.

Software Installation for Windows 98, Me, and 2000

1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 5-1 should appear. If it does
not, click the Start button and choose Run. In the field that appears, enter
D:\setup.exe (where "D" is the letter of your CD-ROM drive).
• Install - Click the Install button to begin the software installation process.
• User Guide - Click the User Guide button to open the PDF file of this User
Guide.
• Exit - Click the Exit button to exit the Setup Wizard.
10
Instant Wireless
Figure 5-1
Series Dual-Band Wireless A+G PCI Adapter
®
2. To install the Adapter, click the Install button on the Welcome screen.
3. After reading the Warranty Policy, shown in Figure 5-2, click the Next but-
ton if you agree, or click the Cancel button to end the installation.
4. Next you will choose your type of wireless network. If you will connect to
both 802.11a and 54g networks, select 5GHz + 2.4GHz. If you will connect
to only 802.11a, select 5GHz. If you will connect to only 54g, select
2.4GHz. Click the Next button to continue.
Figure 5-2
Figure 5-3
11