Chapter 5: Hardware Installation - Linksys WMP11 ver. 2.7 User Manual

5. After the files have been successfully copied, the screen in Figure 4-6 will
appear. Click the Finish button.
Proceed to "Chapter 5: Hardware Installation."
10
Instant Wireless
Figure 4-6
Series Wireless PCI Card
™
Chapter 5: Hardware
Installation
1. Remove any CDs or disks from their drives, and turn off your desktop PC.
2. Open your PC's case, and locate an available PCI slot on the motherboard.
Check with your computer manufacturer for instructions.
3. Slide the Card into the PCI slot. Make sure that all of its pins are touching
the slot's contacts. You may have to apply a bit of pressure to slide the Card
all the way in.
4. After the Card is set firmly in place, secure its fastening tab to your PC's
chassis with a mounting screw. Then close your PC's case.
Important for Windows 98, Me, and 2000 users: You must run the
Setup Wizard to install the software before installing the hardware.
Important for Windows XP users: You must install the Card's hard-
ware before installing the software.
Figure 5-1
11