Using The Expert Mode - Linksys WMP11 ver. 2.7 User Manual

9. The Confirm New Settings screen will appear next. The former and new set-
tings are shown. To save the new settings, click the Yes button. To cancel
the settings and return to the Profiles screen, click the No button. To edit
the new settings, click the Back button.
10. The Congratulations screen will appear next. Click Activate new settings
now to implement the new settings immediately and return to the Link
Information screen. Click Activate new settings later to keep the current
settings active and return to the Profiles screen.
You have successfully created a connection profile. Click the X (Close)
button in the upper right corner to exit the WLAN Monitor.
30
Instant Wireless
Figure 7-17
Figure 7-18
Series Wireless PCI Card
™

Using the Expert Mode

1. On the Profiles screen, click the New button to create a new profile.
2. Enter a name for the new profile.
2. Choose Expert Mode. Then click the Next button.
3. The Profile - Basic Setting screen will appear. Configure the basic network
type and wireless connection setting on this screen.
Network Type
Infrastructure Mode - Click the Infrastructure Mode radio button if you
want your wireless computers to communicate with computers on your
wired network using a wireless access point. Click the Power-Saving Mode
button if you want the Card to enter sleep mode when the wireless connec-
tion is inactive.
Ad-Hoc Mode - Click the Ad-Hoc Mode radio button if you want multi-
ple wireless computers to communicate directly with each other.
Figure 7-19
Figure 7-20
31