Chapter 6: Manual Installation And Setup For Windows 98; Overview; Installing The Network Card's Driver - Linksys EtherFast 10/100 User Manual

Chapter 6: Manual Installation and
Setup for Windows 98

Overview

After physically installing the EtherFast
follow these instructions to install the network device driver. The installation
procedure for the network driver will vary depending on which version of
Windows 98 you are using, and on your current system configuration. If at any
time during the installation you encounter problems, refer to the
Troubleshooting section.

Installing the Network Card's Driver

1. Start up your PC in Windows 98.
2. Windows 98 will automatically detect the presence of the EtherFast
your PC.
3. Insert the Linksys LNE100TX (ver. 5) Setup Utility CD into your CD-ROM
drive while the Add New Hardware Wizard window is visible. Click the Next
button.
19
Instant EtherFast ® Series
® 10/100 LAN Card in your computer,
® Card in
EtherFast ® 10/100 LAN Card
4. Select Search for the best driver for your device (Recommended) and
click the Next button.
5. Select Specify a location and type D:\Drivers\WIN98 in the drop-down
box. Then, click the Next button.
20