Table of Contents
Advertisement
POWER OUTPUT (reference)
Rated impedance
General
Power requirements
Power consumption
Standby power consumption
Dimensions (approx.)
Mass (approx.)
Wireless transceiver (EZW-RT10/EZW-
RT10A)
Communication system
Frequency band
Modulation method
Power requirements
Dimensions (approx.)
Mass (approx.)
USB Wireless LAN Adapter (UWA-BR100)
Standards Compliance:
Host Interface:
Security:
Frequency and Channel*: 2.4 GHz - 2.4835 GHz
Data Rate**:
Power consumption:
than 1% total harmonic
distortion from 250 milli
watts to rated output.
167 W (per channel at 3
ohms, 1 kHz)
3 - 16 Ω
120 V AC, 60 Hz
On: 50 W
0.9 W (standby mode)
0.13 W (turned off)
206 mm × 60 mm × 256
mm (8
1
/
in × 2
3
/
in × 10
8
8
1
/
in) (w/h/d) with the
8
wireless transceiver
inserted
1.3 kg (2 lb 14 oz)
S-AIR Specification
version 1.0
2.4000 GHz - 2.4835 GHz
DSSS
DC 3.3 V, 350 mA
50 mm × 13 mm × 60 mm
(2 in ×
17
/
in × 2
3
/
in) (w/
32
8
h/d)
24 g (1 oz)
IEEE 802.11a/b/g/n
USB 2.0
64/128 bit: WEP, WPA/
WPA2, WPS
[CH1 - 11]
5.15 GHz - 5.25 GHz
[CH36 - 48]
5.25 GHz - 5.35 GHz
[CH52 - 64]
5.47 GHz - 5.725 GHz
[CH100 - 140]
5.725 GHz - 5.85 GHz
[CH149 - 165]
802.11a/g: 54, 48, 36, 24,
18, 12, 9 and 6 Mbps
802.11b: 11, 5.5, 2 and 1
Mbps
802.11n: up to 300 Mbps
(40 MHz/spatial streams:
2)
Tx: up to 500 mA
Mass (Approx.):
Dimensions (Approx.) (w × h × d):
* The frequency and channel differ depending on the
area.
** The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of
products, the radio wave conditions, the line traffic,
and the products that you use. The transmission may
also be cut off depending on the radio wave
conditions. The standard values of the transmission
speed are the theoretical maximum values for the
wireless standards. They are not the actual speeds of
data transmission.
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3W (main unit),
0.13W (surround amplifier).
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
USB Wireless LAN
Adapter: 27 g (1 oz)
USB Wireless LAN
Adapter: 96 mm × 14 mm
× 27 mm (3
7
/
in ×
9
/
in ×
8
16
1
1
/
in)
8
69
US
Advertisement
Table of Contents
