Muting Mode - Cobra XR-1050 Operating Instructions Manual

Operation
Selecting Manual Muting Mode
Muting
In Manual Mute mode the alerts will always be
heard at the set volume level.
Press and release
1
is being received. AUTO, MUTE, OFF will appear on
the display for 2 seconds, then disappear.
Note
Selecting Auto Muting Mode
The factory default mode
In Auto Mute mode the alerts will be heard at the
seting is Auto Muting.
set volume for 3 seconds, then automatically be
reduced to a lower level.
PRESS &
RELEASE
Press and release
1
signal is being received.
AUTO, MUTE, ON will appear in display for 2 seconds,
then disappear.All future alarms will be Auto Mute.
In Voice Alert™, the message "AutoMute"
will be heard.
14
(from Auto mode)
Mute Button when no signal
(from Manual mode)
Mute button when no
A U T O
M U T E
O N
Voice/Tone Settings
PRESS &
RELEASE
1 Press and hold MUTE button for two seconds
to change between Voice and Tone Alarms.
In Tone Setting, TONE , MODE, ON, will be
displayed and a beep will be heard.
T O N E
Voice Alert™
The Voice Alert™ message will stay on for
2 seconds.
In Voice Alert™ setting, the message "Voice Alert"
will be heard and VA, MODE, ON, will be displayed.
V A
M O D E
O N
Operation
Tone Alarm
And Voice
Alert™
Note
Voice Alert™ is the factory
default setting.
15