Operation; Turning On; Set Volume - Cobra XR-1050 Operating Instructions Manual

Operation

Turning Turning On Your XR-1050
On Your
XR-1050
Note
Pressing the volume up
button while you turn on
1
unit will show all 10 Alerts
with their Tones.
3
In both tone and voice modes, the unit will announce
"Testing" and the message TEST will be displayed. The
display shows four typical alerts – X, Laser, VG2,
Emergency Vehicle and announces "System Ready" .
The system indicates if Voice Alert™ or Tone only mode
has been selected and if VG2 audio alert is turned on
or off.
8
Plug power cord into Plug power cord into
2
detector.
cigarette lighter.
Press the Power Button.
T E S T

Set Volume

Adjust the volume up or down using the volume
rocker switch on side of unit.
-
The volume control has 8 volume settings, levels 0-
8. As the level is increased, "Voice Alert™"or the
beep tone will allow you to hear the volume level.
At level 8 a "beep beep"is heard indicating
maximum volume.
V O L 8
Operation
9