Table of Contents
Related Manuals for Cobra XR-1010
Summary of Contents for Cobra XR-1010
- Page 1 Operating Instructions for your Cobra® High Performance 10 Band® XR-1010 Radar/Laser Detector With UltraBright™ Data Display • 4 Radar Signals • 4 Laser Signals • 2 Safety Systems Nothing comes close to a Cobra™ Band MicroTalk...
-
Page 2: Introduction
RADAR/LASER DETECTOR available today. This booklet contains instructions and information designed so that you will be able to understand how the Cobra® XR-1010 works and how radar and (LIDAR) laser are used. Enjoy your Cobra® XR-1010 Radar/Laser Detector and drive safely. -
Page 3: Controls & Indicators
Safety Alert®s will become more common. The Safety Alert® Transmitter is in use in all 50 states in limited quantities. Thank you for purchasing Cobra®’s XR-1010, the worlds first 10-band™ Radar/Laser Detector with Digital Signal Processing. It features a high speed RISC digital processor, similar to those used in high end personal computers. -
Page 4: Table Of Contents
• Tone Alert • Voice Alert™ • Separate Visual and Audio Alarms • LaserEye® 360˚ Detection • VG-2 Undetectable • Auto and Manual Muting • 4 Level Dim Button • Audio Jack • Superior Audio Volume • Adjustable Windshield Mounting Bracket XR-1010... -
Page 5: Installation
Both radar and laser transmissions pass through glass but not through other objects. For this reason the Cobra® XR-1010 lenses must not be blocked.The LaserEye® should have a view of the rear window to take advantage of its 360˚... -
Page 6: Quick Start
Peel top paper off. of the detector (when mounted as above), be sure that your Cobra® XR-1010 has a level, clear view of the road before you attach the hook and loop material. Plug power cord into detector. - Page 7 Set Highway/City Mode City Mode City Mode For urban driving–reduces the number of false radar alerts. Note The XR-1010 will retain the chosen mode while OFF. For more detailed Press and release operation instructions Cty will display while in City mode.
-
Page 8: Operation
Operation Turning Turning On Your XR-1010 On Your XR-1010 Plug power cord into detector. Note Pressing the volume up button while you turn on unit will show all 10 Alerts with their Tones. Press the Power Button. In Tone and Voice modes, the unit will announce “Testing”... -
Page 9: Dim Button
Operation Dim Button Dim Button You may select from four levels of brightness for your Cobra® XR-1010 display: Bright, Dim, Dimmer and Dark (Off). PRESS & RELEASE Press and release Note brightness to Dim. A single beep confirms this Bright = “Beep-Beep”... -
Page 10: Muting Mode
Operation Muting Audio Muting The Mute button is used to temporarily turn off the alarm and control Auto Mute mode. Manual Muting Press this button to turn off the audio alarm. PRESS & RELEASE Note To completely turn off Press and release incoming alerts while in the audio during an alert. -
Page 11: Tone/Voice Alert
LTI 20-20*, Ultra Lyte*, ProLaser* and ProLaser lll*, VG-2, and Safety and Strobe Alert™ signals. Instant-On Detection The Cobra® XR-1010 is also designed to detect Instant-on speed monitoring signals. Immediate action is required when warning is given. Detection... -
Page 12: Vg-2 Undetectable
Distinct tones will also be generated for each band. VG-2 Undetectable VG-2 Alert ® The Cobra® XR-1010 is undetectable by police VG-2 Note detection devices. It will alert you when one is in The display does not use near your vehicle. During this time, the unit is indicate signal strength. -
Page 13: Radar/Vg-2/Laser Alerts
Detection Laser Laser & LaserEye® 360˚ Detection The XR-1010 can separately identify four laser signals. Note ProLaser, ProLaser 3, LTI 20/20, and Ultra Lyte The display does not Laser Guns. indicate signal strength. Note In Voice Alert™, the The display will illuminate the L followed by a distinct message “Be careful—Laser... -
Page 14: Maintenance
Replacing Power Cord Fuse Unscrew cap of cigarette lighter adapter and remove fuse. Replace with 1-ampere fuse only. Troubleshooting If your COBRA® LASER DETECTOR XR-1010 isn’t operating, we suggest you make the following checks: 1. Is the power cord properly connected? 2. -
Page 15: Optional Accessories
Straight 12V Power Cord Curled 12V Power Cord Windshield Mounting Bracket Subtotal (Tax if applicable) Shipping/handling $4.00 Total Make check or money order (no stamps) payable to: Cobra Electronics 6500 West Cortland Street Chicago, IL 60707 USA Attn: Accessories Dept. State Exp. Date... -
Page 16: If You Think You Need Service
4. Pack unit securely to prevent damage in transit. If possible, use the original packing material. 5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or First Class Mail to: Cobra Factory Service, Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, IL 60707 USA.