Highway/City Mode; Ultrabright Data Display Brightness - Cobra PRO 9480 Operating Instructions Manual

Settings
Your Detector

Highway/City Mode

Setting your detector to City mode delays all X band audio alerts until
the signal strength reaches Level 3. (A single beep will sound when the
signal is first detected.) This will reduce false alerts while you are driving
in, or near, urban areas where there are many sources for conflicting
X band signals such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear (either in Voice Alert or Tone Alert mode)
as you complete each step. The factory setting is Highway mode.
Highway Mode
h
X K Ka V S
City Mode
c
X K Ka V S
City Button
Press and
release
To Change From Highway Mode To City Mode
Press and release
Tone
the City button.
One (1) beep
To Change From City Mode back To Highway Mode
Press and release
Tone
the City button again.
Two (2) beeps
English
6
Voice Visual Display
City appears
c
in the display
Voice Visual Display
h
Highway
appears
in the display
Settings
Your Detector

UltraBright Data Display Brightness

You can choose from three (3) settings for Brightness of the display.
You can cycle through the settings by repeatedly pushing the Dim button.
The factory setting is Bright.
Bright
Press and
release Dim
Dark
button
Dim
Dim Button
Press and
release
To Change The Brightness To Dim
Press and release
Tone
the Dim button
One (1) beep
once.
To Change The Brightness To Dark
Press and release
Tone
the Dim button
One (1) beep
again.
To Change The Brightness To Bright
Press and release
Tone
the Dim button a
Two (2) beeps
third time.
Voice Visual Display
Dim Display dims
Voice Visual Display
Dark Display remains
dim (no visual
alerts will be seen)
Voice Visual Display
Bright Display returns
to full brightness
Nothing comes close to a Cobra ® 7