Network Storage Link for USB 2.0 Disk Drives
Upgrade
The Upgrade screen allows you to upgrade the Storage Link's firmware.
Current Firmware
This shows you the current version of the Storage Link's firmware. Click the Check for Update button to browse
the Linksys website for the Storage Link's latest firmware.
Upgrade
Figure 6-14: Administration Tab - Advanced/Upgrade
You will need to download the new firmware file to your PC before upgrading it. Click the Browse button to locate
the upgrade file on your PC, then click the Start Upgrade button to apply the upgrade.
Click the Help button to get more information about this screen.
Setup
Clicking the Setup tab brings you back to the Administration tab's LAN screen.
Chapter 6: Configuring the Storage Link
29
Administration Tab