Figure 4-6: Confirm New Settings; Figure 4-7: Change Settings; Figure 4-8: Format - Linksys NSLU2 User Manual

Network Storage Link for USB 2.0 Disk Drives
7. On the next screen, review the Network Storage Link's settings. If they are correct, click the Save button. If
you would like to change them, click the Back button to return to a previous screen.
8. The next screen will verify if you want to change the settings. To save these changes, click the OK button or
click the Cancel button to return to the previous screen.
9. If the USB hard drive has not previously been used in a Storage Link, its format must be changed. You will be
asked to verify if you want to change the format. To change the USB drive's format so that it can be used in
the Storage Link, click OK. To leave the USB drive unchanged, click Cancel, and you will not be able to store
data on the hard drive.
Chapter 4: Setting Up the Storage Link
Setup Wizard

Figure 4-6: Confirm New Settings

Figure 4-7: Change Settings

Figure 4-8: Format

11