Figure 6-12: The Define Backup Job Screen - Linksys NSLU2 User Manual

Network Storage Link for USB 2.0 Disk Drives
Define Backup Job
From this screen, you can add new backup jobs, which will be displayed on the Backup screen. Follow the
guidelines below when adding jobs:
Name. The backup job's name must be composed of alphanumeric symbols not exceeding 15 characters in
length.
Backup Type. Select the desired backup type. Selecting Full will back up all files. The Incremental option will
only back up files as they are changed. Selecting Synchonize will back up all files to start, then any files on the
destination which do not exist on the source are deleted.
Direction. Select the desired direction where backing up will occur:
• From this NSLU2 to another device - Data on the Storage Link is backed up to a remote device.

Figure 6-12: The Define Backup Job Screen

• From another device to this NSLU2 - Data on a remote device is backed up to the Storage Link.
This NSLU2
Share. Select the applicable share.
If backing up from the Storage Link, select the share you wish to back up.
If backing up to the Storage Link, select the share where you want the backed-up data to be stored.
When the Sub-folder field appears, enter the location of the sub-folder where the share will be stored.
Other Device. Enter the details of the remote device where data will be backed up:
Name. The backup job's name must be composed of alphanumeric symbols not exceeding 15 characters in
length.
Shared Folder. Enter the name of the shared folder. Depending on the direction of the backup, this is either the
share to be backed up, or the destination for the backed-up data.
Access to folder requires login. If the share is password-protected, enable this checkbox and enter the Login
Name and Password required to gain access to the share.
Chapter 6: Configuring the Storage Link 26
Administration Tab