Linksys HPN100 User Manual page 47

Manually Installing the
Network Components in
Windows
There may be times when you might need to manually install missing Windows
networking components.
1. Click on Start, Settings, then Control Panel.
2. Double-click the Network icon. The Network window appears.
3. Click on the Configuration tab. Linksys recommends that the following net-
work components are installed for you to properly connect to your HomeLink
network. Of course, every network is different, so your settings will depend on
what settings are on your various PCs. If you have a broadband Internet con-
neciton, your sevice provider may recommend different settings. Talk to your
broadband service provider if you have questions about which protocols are
needed.
Client for Microsoft Networks
Linksys HomeLink + 10/100 PC Card (PCM100H1)
TCP/IP
NetBEUI
IPX/SPX
If the required components are missing, add them as follows:
Adding NetBEUI
Click on the Add button. Select Protocol, then click on Add. Under
Manufacturer, highlight Microsoft. Under Network Protocol, highlight
NetBEUI. Click OK.
Adding Client for Microsoft Networks
If you plan on connecting to an NT file server or peer-to-peer network, click on
the Add button. Highlight Client and click on Add. Select Manufacturer and
choose Microsoft. In the Network Client box, highlight Client for Microsoft
Networks and click OK.
page 44