Linksys HPN100 User Manual page 15

7. Double-click on the Network icon. The Network window will appear. Click
on the Configuration tab.
8. Make sure that the following network components are installed:
Client for Microsoft Networks
Linksys HomeLink + 10/100 PC Card (PCM100TH)
NetBEUI
TCP/IP
There may be other components listed in addition to the ones shown above.
This is fine. Different components are required for different network configura-
tions. If you are missing required components, you'll need to install them man-
ually. Refer to page 58 in the Troubleshooting section of this user guide.
Please Note: If you need to install the TCP/IP Protocol, contact your system
administrator or refer to the Windows 98 documentation. Linksys does not pro-
vide technical support for the setup or configuration of the TCP/IP protocol.
page 12