Linksys HPN100 User Manual page 35

Changing the Card Settings
For most users, the HomeLink default settings will be perfect for both
Phoneline and Ethernet networking. However, you can make any necessary
changes to your system's network settings by clicking on your taskbar's Start
button, then Settings, then Control Panel, and then the Network icon.
Note: Only change these settings if you know what you are doing.
1. To access your HomeLink driver, click on the Configuration tab, highlight
Linksys HomeLink Phoneline + 10/100 Network PC Card and click on
Properties.
2. The Linksys HomeLink Properties window will open. Click on Advanced.
page 32