Linksys HPN100 User Manual page 34

Homelink series homelink phoneline + 10/100 network pc card

Hide thumbs Also See for HPN100:

Table of Contents

If You Have Problems

If the EtherFast card's coupler doesn't light up after you restart your computer,

you may need to change your slot's boot setting in NT. Follow these instruc-

tions: Click on Start, Settings, Control Panel. Double-click on the Devices

icon. Scroll down in the Devices list to PCMCIA. Click on Startup. Verify

that the Startup Type is set to Boot. If it isn't, use your mouse to select it. Click

OK, then Close. Choose to restart your computer.

page 31

Table of Contents