Advertisement
PNP/PCI Configuration à PCI IDE IRQ Map To
PCI IDE IRQ Map
Some old PCI IDE add-on cards are not fully PnP
To
compatible. These cards require you to specify the
slot in use to enable BIOS to properly configure the
ISA
PnP resources. This function allows you to select the
PCI-Slot1
PCI slot for any PCI IDE add-on card present in your
PCI-Slot2
system.
PCI-Slot3
automatically configure the installed PCI IDE card(s).
PCI-Slot4
PCI-Auto
PNP/PCI Configuration à Primary IDE INT#
PNP/PCI Configuration à Secondary IDE INT#
Primary IDE INT#
These two items, in conjunction with item "PCI IDE
IRQ Map To", specify the IRQ routing of the primary
A
or secondary channel of the PCI IDE add-on card (not
B
the onboard IDE).
C
interrupts aligned as listed in the table below. You
D
must specify the slot in the "PCI IDE IRQ Map To",
and set the PCI interrupt (INTx) here according to the
interrupt connection on the card.
AWARD BIOS
Set this item to Auto to allow BIOS to
Each PCI slot has four PCI
3-27
Advertisement
