Ur2 Duplex Mode - MSI MS-6189 Manual

CHAPTER 3 CHAPTER 3 CHAPTER 3 CHAPTER 3 CHAPTER 3
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
xUR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
xECP Mode Use DMA
Game Port Address
Midi Port Address
Midi Port IRQ
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the systen board and you wish to use it. If the system has no
floppy drive, select Disabled in this field.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and
second serial ports.
UART Mode Select
This item allows you to select the UART mode.

UR2 Duplex Mode

This item allows you to select the IR half/full duplex function.
SIS 950 SuperIO Device
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Half
378/IRQ7
SPP
3
201
330
10
3-21
AWARD AWARD AWARD AWARD AWARD BIOS SETUP BIOS SETUP BIOS SETUP BIOS SETUP BIOS SETUP
®
Item Help
Menu Level >