MSI MS-6189 Manual page 26

CHAPTER 2 CHAPTER 2 CHAPTER 2 CHAPTER 2 CHAPTER 2
2.19 Modem W 2.19 Modem W
2.19 Modem W 2.19 Modem W 2.19 Modem Wak
The JMDM1 connector is for used with Modem add-on card that supports
the Modem Wake Up function. To use this function, you need to set the
"Resume by Ring" to enable at the BIOS Power Management Setup.
Note: Modem wake-up signal is active "low".
Note: To be able to use this function, you need a power supply that
provide enough power for this feature. (Power supply with 750mA
5V Stand-by)
ak ak e Up Connector: JMDM1 e Up Connector: JMDM1
ake Up Connector: JMDM1 ak e Up Connector: JMDM1 e Up Connector: JMDM1
PIN
1
2
3
4
5
2-22
HARD HARDW W W W W ARE INST HARD HARD HARD ARE INSTALLA ARE INST ARE INST ARE INST
SIGNAL
NC
GND
MDM_WAKEUP
NC
5VSB
ALLATION ALLA ALLA ALLA TION TION TION TION
1
5
JMDM1