Quick Start - Cobra ESD-6050 Operating Instructions Manual

Installation
Dash Dash Mounting
Mounting
Peel protective
1
paper off one side
Note
of hook and loop
It will be easy for you to
material.
remove and reinstall your
Cobra® ESD-6050 detector
at any time using this hook
and loop material on the
dashboard.
Remember: Without the
means to adjust the angle
of the detector (when
Peel top paper off.
3
mounted as above), be
sure you that your Cobra®
ESD-6050 has a level, clear
view of the road before you
attach the hook and loop
material.
Plug power cord
5
into detector.
4
Turn On and Adjust Volume
Place on dash.
2
Place detector on
4
hook and loop pad.
Plug power cord
6
into cigarette lighter.
Rotate ON-OFF Volume Control to left (away
1
from you). An audible "tone" will indicate the
unit is on. PWR LED on front of unit
is illuminated.

Quick Start

Turn On and
Adjust Volume
5