Quick Start - Cobra XR-1010 Operating Instructions Manual

Installation
Dash Dash Mounting
Mounting
Peel protective
1
paper off one side
Note
of hook and loop
It will be easy for you to
material.
remove and reinstall your
Cobra® XR-1010 detector at
any time using this hook
and loop material on the
dashboard.
Remember: Without the
means to adjust the angle
Peel top paper off.
3
of the detector (when
mounted as above), be
sure that your Cobra®
XR-1010 has a level, clear
view of the road before you
attach the hook and loop
material.
Plug power cord
5
into detector.
4
Turn On and Adjust Volume
Place on dash.
2
Set Display Brightness
Select from four levels of LED brightness display:
Bright, Dim, Dimmer and Dark. The state-of-the-art
readout presents clear alerts even in sunlight.
Place detector on
4
hook and loop pad.
Plug power cord
6
into cigarette lighter.
Press the power button to activate the unit.
A
In both tone and voice modes, the unit will
announce "Testing" .
The volume control has 8 volume settings.
B
Adjust the volume up or down using the volume
rocker switch.
PRESS &
RELEASE
Press and release Dim button once to select
Dim setting.
Press and release Dim button a second time
to select Dimmer setting.
Press and release Dim button a third time to
select Dark setting.
Press and release Dim button again to select
Bright setting.

Quick Start

Turn On and
Adjust Volume
Note
Display Dim, City/Highway,
and Muting mode settings
are retained in memory
when power is unplugged.
For more detailed
operation instructions
on turn on/adjust
volume, see page 9.
Set Display
Brightness
LED Displays
Note
A four position Dim mode is
provided for dusk or night
driving (please see Dim
Button, page 10.
5