Cobra ESD6160 Installing And Using

ESD-6160CS.MANUAL.qx 10/23/98 4:52 PM Page 1
1. What You'll Need To Install The ESD-6160CS:
Installing and Using Your
NOTE: Detailed instructions on opposite side
DETECTION SYSTEM
Model ESD -6160CS
™
2. Installing The ESD-6160CS:
ON WINDSHIELD
ATTACH CUPS TO BRACKET
ATTACH BRACKET TO WINDSHIELD
ATTACH DETECTOR TO BRACKET
Cobra Electronics Corporation
6500 West Cortland Street,
Chicago, Illinois 60707
BEND BRACKET FOR CORRECT DETECTION ANGLE (IF NEEDED)
PLUG POWER CORD INTO DETECTOR
PLUG POWER CORD INTO CIGARETTE LIGHTER
PRINTED IN KOREA ©1998 COBRAELECTRONICS CORPORATION 480-271-P-001
ESD-6160CS Windshield Bracket Hook and Loop Material
(For on-dash mounting)
NEED HELP?
ON DASH
PEEL PROTECTIVE PAPER OFF ONE SIDE OF HOOK AND LOOP
PLACE ON DASH
PEEL TOP PAPER OFF
PLACE DETECTOR ON HOOK AND LOOP PAD
POWER CORD INTO DETECTOR
PLUG POWER CORD INTO CIGARETTE LIGHTER
3. Operating The ESD-6160CS:
A. Turn On and Adjust Volume
The unit will chirp 3
times and the red
single digit display
will illuminate
B. Set Display Brightness
NORMAL
DIM
DIMMER
Power Cord
DARK
C. Set Highway/City Mode
CITY: For urban
driving-reduces
number of X-Band
false audible alerts.
HIGHWAY: For all
other driving.
D. Muting
Press to reduce
volume of audible
alert in progress.
E. LaserEye
360° Laser
Detection
F. Indicators and Visual Alerts
Power
Either an , or will illuminate
when the unit is on.
X Band Radar
.
X
Blinks faster as source approaches
K and Ka Band Radar
K/Ka
Blinks faster as source approaches
VG2
VG2
Blinks at a steady rate
Safety Alert ® Traffic Warning System
Emergency
Road Hazard
SA
Railroad
Both the red SA LED and the
single digit display will illumi-
nate for the Safety Alert signal.
Laser
Blinks at a steady rate
Highway/City Mode
Highway City