Cobra ESD6000 Installing And Using

ESD-6000.MANUAL.qx 11/13/97 10:26 AM Page 1
1. What You'll Need To Install The ESD-6000:
Installing and Using Your
NOTE: Detailed instructions on opposite side
DETECTION SYSTEM
Model ESD -6000
™
2. Installing The ESD-6000:
ON WINDSHIELD
U.S. Patent No. 5,497,148
ATTACH CUPS TO BRACKET
ATTACH BRACKET TO WINDSHIELD
ATTACH DETECTOR TO BRACKET
Cobra Electronics Corporation
6500 West Cortland Street,
Chicago, Illinois 60707
BEND BRACKET FOR CORRECT DETECTION ANGLE (IF NEEDED)
PLUG POWER CORD INTO DETECTOR
PLUG POWER CORD INTO CIGARETTE LIGHTER
PRINTED IN KOREA ©1997 COBRA ELECTRONICS CORPORATION 480-260-P-001
ESD-6000 Windshield Bracket Hook and Loop Material
(For on-dash mounting)
NEED HELP?
ON DASH
PEEL PROTECTIVE PAPER OFF ONE SIDE OF HOOK AND LOOP
PLACE ON DASH
PEEL TOP PAPER OFF
PLACE DETECTOR ON HOOK AND LOOP PAD
POWER CORD INTO DETECTOR
PLUG POWER CORD INTO CIGARETTE LIGHTER
3. Operating The ESD-6000:
A. Turn On and Adjust Volume
LEDs are briefly
illuminated at
Power ON
B. Set Display Brightness
NORMAL
Power Cord
LOW
OFF
C. Set City/Highway Mode
CITY: For urban
driving-reduces
number of X-Band
false audible alerts.
HIGHWAY: For all
other driving.
D. Muting
Press to reduce
volume of audible
alert in progress.
E. Indicators and Visual Alerts
Power
Illuminates when On
X Band Radar
Blinks faster as source approaches Turn on sequentially as source approaches
K and Ka Band Radar
Blinks faster as source approaches Turn on sequentially as source approaches
Laser
Blinks at a steady rate Both turn on
VG-2
Blinks at a steady rate
Safety Alert ® Traffic Warning System
All Flash
City/Highway Mode
Illuminates in CITY mode