Panasonic DMR-BWT955GL Service Manual page 41

Error Code Diagnosis Contents
PLEASE Unit is in termination
WAIT process
UNFORM- Unformatted disc error
AT
IR communication error
IR ERR
Recording is impossible
No REC
[HDD ERR] is displayed
HDD
when start up of HDD was
ERROR
failed.
(Except error of setting of
Power on Stand-by)
Power on Stand-by setting
HDD NG
error
Erase is impossible
NoERAS
NoWRIT Writing is impossible
Timer programmes are full
PROG
FULL
Description
Unit is in termination process now.
"BYE" is displayed and power will be turned
off.
In case "Quick Start" of setup menu is ON, it
is displayed in restoration operation for AC
off.
You have inserted an unformatted BD-RE,
BD-R. DVD-RAM or DVD-RW that is unfor-
matted or recorded on other equipment.
[IR ERR] is displayed when communication
between Timer microprocessor and IR
microprocessor fails.
[No REC] is displayed when recording is
impossible due to the defect, dirt or wound of
media.
a) When normal start up was failed.
b) When start up at HDD boot was failed.
c) When start up from state of P-OFF was
failed.
d) When start up from state of HDD SLEEP
was failed.
[HDD ERR] is displayed when above each
start up of HDD was failed.
*In case b), tray opens automatically and
[HDDERR] is displayed until version up disc
is inserted.
[HDD NG] is displayed when power on
Stand-by setting of HDD is NG or when HDD
which power on Stand-by is not set to is
used.
Please try to replace HDD with genuine HDD
as service parts.
You cannot delete items on this disc.
The disc may be damaged. Use a new disc.
You cannot write to this disc.
The disc may be damaged. Use a new disc.
There are already 32 timer programmes.
Delete unnecessary timer programmes.
41
Monitor Display Automatic FL display
No display
The character indication flows
sideways.
The character indication flows
sideways.
No display
No display
No display
No display
No display
No display
No display